- Right Chemical Solutions
Precision Cleaning Chemicals for Auto Components Manufacturing
Right Chemical Solutions for Every Metal. Every Process. Every OEM Standard.
- INDUSTRY OVERVIEW
India's Auto Components Sector Demands Zero Compromise on Cleanliness
Auto component manufacturing is one of the most demanding environments for industrial cleaning chemicals. Every component — from engine parts and transmission assemblies to braking systems, suspension parts and HVAC components — must meet stringent OEM cleanliness standards before it moves to the next stage of production.
A contaminated surface means failed Millipore tests, coating adhesion failures, premature corrosion, and ultimately — rejected components. In a sector where Tier 1, Tier 2 and Tier 3 suppliers are held to increasingly strict quality gates by OEMs like Maruti Suzuki, Tata Motors, Mahindra, Eicher Motors, Force Motors and Ashok Leyland — the cleaning chemical you use is not a minor input. It is a critical process variable.
REFA Chemical Industry has been supplying precision cleaning chemicals to auto component manufacturers across India since our founding — and our founding father’s experience in this sector spans 25 years. We understand OEM cleanliness standards, Millipore testing requirements, and the specific challenges of cleaning aluminum, mild steel, cast iron, brass and copper components used across the auto components value chain.
Years Experience in Auto Components Cleaning
Supplying Ancillaries of 6+ Major OEMs
HVAC
Auto HVAC Cleaning
Specialists
Auto Component Customers
Pan India
Every Metal Used in Auto Components Manufacturing
REFA has dedicated cleaning chemistry for every metal substrate in the auto components sector
Aluminum & Aluminum Die Cast (ADC)
Engine components, HVAC parts, cylinder heads, heat exchangers, brackets, and other Cleaning challenge: Oil, grease, flux residues, zinc stearate lubricants, brazing residues
Mild Steel & Cast Iron
Engine blocks, transmission housings, brake components, chassis parts Cleaning challenge: Heavy oil, metal chips, rust, pre-phosphating preparation
Stainless Steel
Exhaust components, fuel system parts, fasteners Cleaning challenge: Oil contamination, welding residues, annealing stains
Brass & Copper
Fuel system components, electrical connectors, radiator parts Cleaning challenge: Oxidation, tarnish, oil contamination, surface staining
Zinc & Zinc Die Cast
Carburettor parts, door handles, decorative components Cleaning challenge: Release agents, lubricant residues, surface preparation
Multi-Metal Assemblies
Complex assemblies with mixed metal substrates Cleaning challenge: Single chemistry that is safe and effective across multiple metals simultaneously
Cleaning Challenges We Solve Every Day
The most common problems auto component manufacturers face — and how REFA solves them
High Millipore Values
Your components are failing OEM Millipore cleanliness tests — metallic particle counts are above acceptable limits. REFA Solution: Our precision ultrasonic cleaning chemicals are specifically formulated to achieve low Millipore values — with optimized surfactant systems that capture and remove fine metallic particles completely.
Oil and Grease Residue After Machining
Cutting oil, hydraulic oil and machining lubricants remain on component surfaces after machining — causing coating adhesion failure and corrosion. REFA Solution: Our range of degreasers for aluminum, mild steel, cast iron and stainless steel removes all machining residues completely — leaving surfaces clean, dry and ready for the next process.
Flux and Brazing Residue on Aluminum HVAC Parts
Flux residues after aluminum brazing are corrosive and must be completely removed before assembly — failing to do so causes premature failure in the field. REFA Solution: REFA's specialized aluminum brazing flux removal chemicals and ultrasonic degreasers are trusted by all major auto HVAC manufacturers in India for complete flux removal without attacking the base metal.
Foam Overflow in Cleaning Machines
Excessive foam in spray jet or ultrasonic cleaning machines causes machine overflow, process disruption and poor cleaning results. REFA Solution: Our low-foam and non-foaming degreaser formulations are specifically designed for spray jet and pressure washing applications — zero foam problems
Rust Formation Between Processes
Components develop rust during storage between machining and surface treatment — causing rejection and rework. REFA Solution: REFA rust preventive additives and temporary rust protection chemicals provide inter-process rust protection — keeping surfaces clean and rust-free until the next stage.
Paint and Coating Adhesion Failures
Paint, powder coating or plating is peeling or showing poor adhesion — traced back to inadequate surface preparation before coating. REFA Solution: Our complete surface preparation range — degreasing, rust cleaning, phosphating and passivation — ensures optimal surface condition for paint adhesion, powder coating and plating processes.
Cleaning Applications We Support
REFA chemicals are formulated and tested for all standard cleaning machine types used in auto components manufacturing
Ultrasonic Component Washing Machines
Our most recommended application for precision cleaning. Ultrasonic waves combined with REFA chemistry penetrate deep into blind holes, threads and complex geometries — achieving the lowest Millipore values. Suitable for aluminum, brass, copper, stainless steel and mild steel components
Spray Jet Washing Machines
High-pressure spray washing for large or medium components. REFA's non-foaming and low-foam degreasers are specifically designed for spray jet applications — preventing machine overflow while delivering powerful cleaning.
Immersion / Dipping Tanks
Simple, cost-effective cleaning for components that can be fully submerged. REFA chemicals for immersion cleaning are optimized for controlled temperature dipping with consistent bath life.
Vibratory Finishing Machines
For deburring, degreasing and surface finishing simultaneously. REFA Vibro range covers aluminum, mild steel, stainless steel, brass, copper and ADC components in vibratory finishing machines.
Manual / Hand Cleaning
For maintenance cleaning, spot treatment and small batch cleaning. REFA manual cleaning chemicals are formulated for safe and effective hand application with appropriate dilution ratios.
Our Products for Auto Components Manufacturing
A complete range covering every cleaning and surface treatment need in your production line
Aluminum & ADC Cleaning
Aluminum & ADC Cleaning For engine components, HVAC parts, cylinder heads, brackets, die castings
| Product | Type | Application |
|---|---|---|
|
REFA-AL-1012-BT |
Degreaser |
Ultrasonic machine cleaning |
|
REFA-AL-1214-SR |
Heavy Degreaser |
Spray jet, ultrasonic — heavily soiled parts |
|
REFA-AL-1012-GA |
Economical Degreaser |
Ultrasonic — cost-sensitive applications |
|
REFA-AL-ZS PLUS |
Degreaser |
Zinc stearate lubricant removal — dipping |
|
REFA-AL-0203-SN |
Brightener |
Pre-anodizing, pre-painting surface finishing |
|
REFA-AL-1214-SRD |
Alkaline Etching Solution |
Improved paint adhesion — spray jet, ultrasonic |
|
REFA-AL-0102-BD |
Acidic Etching Solution |
Deep etching for specialized surface prep |
|
REFA-AL-0708-P |
Passivation |
Corrosion protection — white and black rust prevention |
|
REFA-AL-0708-ADC |
ADC 12 Degreaser |
Aluminum die cast cleaning — ultrasonic, vibro, dipping |
|
REFA-AL-0103-COND |
Cooling Condenser Cleaner |
HVAC condenser unit cleaning |
Mild Steel & Cast Iron Cleaning
Mild Steel & Cast Iron Cleaning For engine blocks, transmission housings, brake components, chassis parts
| Product | Type | Application |
|---|---|---|
|
REFA-MS-1012-EP |
Precision Degreaser |
Pre-painting, pre-coating, pre-phosphating |
|
REFA-MS-1012-EO |
Fast-Acting Degreaser |
Versatile — pre-phosphating, pre-painting, pre-plating |
|
REFA 1012 KP |
Non-Foaming Degreaser |
Pressure jet cleaning |
|
REFA-MS-1214-DH |
Low Foam Degreaser |
Pressure jet, spray gun cleaning |
|
Pressure jet, spray gun cleaning |
Heat Treatment Degreaser |
Pre-heat treatment heavy oil removal |
|
REFA-MS-0102-RC |
Rust Cleaner |
Rust and oxidation removal before further processing |
|
REFA-MS-0102-RCC |
Rust Converter |
Converts rust to protective coating — one step application |
|
REFA-MS-0708-RA |
Rust Additive |
Temporary inter-process rust protection |
Brass & Copper Cleaning
Brass & Copper Cleaning For fuel system parts, electrical connectors, radiator components
| Product | Type | Application |
|---|---|---|
|
REFA-BRCO-0102-C1 |
Surface Cleaner |
Everyday cleaning and restoration — dipping |
|
REFA-BRCO-0102-C2 |
Surface Cleaner |
Alternative — removes patches and stains |
|
REFA-BRCO-1012-BT |
Degreaser |
Ultrasonic cleaning |
|
REFA-BRCO-0708-P |
Passivation |
Long lasting corrosion protection |
Stainless Steel Cleaning
Stainless Steel Cleaning For exhaust components, fuel system parts, fasteners
| Product | Type | Application |
|---|---|---|
|
REFA-SS-0506-UN-SP |
REFA-SS-0506-UN-SP |
Stubborn residues — ultrasonic, spray, dipping |
|
REFA-SS-1012-UN |
Universal Degreaser |
Everyday ultrasonic cleaning |
|
REFA-SS-1013-DL |
Heavy Duty Degreaser |
Burnt oil and heavy contamination |
|
REFA-SS-0102-BD |
Surface Cleaner |
Cleaning, polishing, stain and burn mark removal |
|
REFA-AL0102-BDSS |
SS Passivation |
Removes brazing, welding, annealing residues |
Surface Preparation & Treatment
Surface Preparation & Treatment Pre-treatment before painting, coating, phosphating and plating
| Product | Type | Application |
|---|---|---|
|
Phosphating Chemicals |
Iron / Zinc Phosphating |
Pre-paint surface preparation |
|
Passivation Chemicals |
Metal Passivation |
Corrosion resistance improvement |
|
REFA-MS-0102-RC |
Rust Cleaner |
Pre-phosphating rust removal |
Vibro Finishing Chemicals
Vibro Finishing Chemicals For vibratory deburring and finishing machines
| Product | Ideal For |
|---|---|
|
REFA VIBRO AL |
Aluminum parts deburring and degreasing |
|
REFA VIBRO AL PLUS |
Aluminum burnishing — mirror finish |
|
REFA VIBRO MS |
Mild steel deburring |
|
REFA VIBRO SS |
Stainless steel deburring and cleaning |
|
REFA VIBRO CO |
Copper surface finishing |
|
REFA VIBRO BRCO |
Brass brightening and deburring |
|
REFA VIBRO ADC |
Aluminum die cast deburring |
Cutting Fluids & Rust Preventives
Cutting Fluids & Rust Preventives For machining operations and inter-process rust protection
| Product | Type | Application |
|---|---|---|
|
REFA DRAW 100 |
Drawing Fluid — Aluminum |
Aluminum drawing operations |
|
REFA DRAW 18 |
Drawing Fluid — Aluminum |
Aluminum drawing — value option |
|
REFA STAMPING 02 |
Stamping / Cutting Fluid |
Stamping and cutting operations |
|
REFA-ULTRACOOL 450 PLUS |
Cutting Oil — Mild Steel |
MS cutting and cooling |
|
REFA-ULTRACOOL 400 |
Cutting Oil — Mild Steel |
MS cutting — alternative option |
|
REFA-ULTRACOOL 27 |
Water Based Cutting Oil |
Aluminum cutting |
|
REFA-RPO PLUS & RPO |
Rust Preventive Oil |
Component rust protection in storage and transit |
Solvent Based Cleaning
Solvent Based Cleaning For paint stripping, heavy contamination and specialized cleaning
| Product | Type | Application |
|---|---|---|
|
REFA-5OOPS |
Paint Stripper |
Multi-layer paint removal from metal surfaces |
|
REFA-500PS PLUS |
Powerful Paint Stripper |
Powder coat and epoxy removal |
|
REFA-500PSW |
Water Based Paint Stripper |
Powder coating removal — high temperature dipping |
|
REFA-CH |
Solvent Cleaner |
General purpose — grease, oil, glue removal |
|
REFA-SOLVE |
Solvent Cleaner |
Heavy duty industrial cleaning |
How We Work With You
We don’t just ship a drum of chemical. We solve your cleaning problem
Supplying ancillaries of leading OEMs including Maruti Suzuki, Tata Motors, Mahindra, Eicher Motors, Force Motors and Ashok Leyland
- Why Choose Us
Why Leading Auto Component Manufacturers Trust REFA
OEM Cleanliness Standards Met
Our products are formulated and validated to meet the cleanliness standards required by major Indian OEMs — including Millipore testing, particle count and visual inspection criteria.
Water-Based & Eco-Friendly
Our entire range is water-based, biodegradable and RoHS compliant — replacing hazardous solvent-based chemicals without compromising performance
Auto HVAC Cleaning Specialists
REFA is the preferred cleaning chemical supplier to India’s auto HVAC manufacturing sector — with deep expertise in aluminum brazing flux removal and HVAC component precision cleaning
In-House R&D for Custom Requirements
Non-standard alloy? Unusual contamination? Specific cleanliness specification from a foreign OEM? Our R&D team develops custom formulations to match your exact requirements.
From incoming material cleaning to pre-treatment, machining support, inter-process rust protection and final component cleaning — REFA covers every cleaning step in your production line.
Complete Production Line Coverage
Send us a WhatsApp message with your component photo and contamination description — our technical team responds within 24 hours with a recommendation.
Fast Technical Support
Water-Based and RoHS Compliant
All REFA products are water-based, biodegradable and RoHS compliant — helping your facility meet environmental compliance requirements and export market standards.
- Case Study
Real Results for Real Manufacturers
See how REFA has solved cleaning challenges across industries
- Industry
Tier 2 Auto HVAC Component Manufacturer
Challenge Flux and oil residues on aluminum brazed components consistently failing OEM cleanliness inspection. High
- North India
- Industry
Auto HVAC Component Manufacturer
Consistent cleanliness results, approved by OEM quality team
- North India
- Industry
Auto Components Manufacturer
Millipore values reduced by 60%, zero rejections in subsequent 3 months
- Faridabad
- FAQ
Frequently asked questions
See how REFA has solved cleaning challenges across industries
Can REFA chemicals meet the Millipore cleanliness standards required by our OEM?
Yes. Our precision cleaning chemicals are specifically formulated for low Millipore values. We recommend the right product and process parameters to meet your OEM’s specific cleanliness specification.
We have an existing cleaning machine — will REFA chemicals work in it?
Yes. Our range covers all standard cleaning machine types — ultrasonic, spray jet, immersion, vibro and manual. Tell us your machine type and we will recommend the most suitable product.
Can you provide trials before we commit to a full order?
Absolutely. We provide trial quantities with full technical support. We recommend validating the product on your actual components and cleaning machine before placing a production order.
Are your products safe for aluminum components?
Yes. Our aluminum cleaning range is specifically formulated to clean aluminum alloys without causing etching, discoloration or surface damage — unless etching is the desired outcome.
Do you supply across India?
Yes. We supply directly and through our distributor network across North India, Rajasthan, Punjab, Gujarat, Tamil Nadu, Karnataka, Maharashtra and other states.
What is the minimum order quantity?
Contact our sales team for MOQ details — we work with manufacturers of all sizes from small job shops to large Tier 1 facilities, and OEMS.
- certification
Ready to Optimise Your Tube, Wire & Extrusion Chemical Process?
Tell us your metals, processes and current challenges — our technical team will recommend the right REFA solution for your operation.
